Store The Cleaner When Not In Use - Zodiac EvoluX iQ Series Owner's Manual

Page 18
4. Remove the filter canister assembly from
the body (3).
3
Figure 19. Remove Filter Canister Assembly
5. Push the quick release button on the
canister assembly (4) and pull open.
Figure 20. Open Filter Canister Assembly
6. Separate the filter canister from the filter
support (6).
Figure 21. Remove Filter Canister
Zodiac EvoluX iQ Robotic Pool Cleaner
® ™
7.
Figure 22. Wash Filter Canister
NOTE: Periodically, remove the filter canister and clean

Store the Cleaner When Not in Use

The cleaner should be cleaned regularly using
slightly soapy clean water. Do not use solvents
such as trichlorethylene or its equivalent. Rinse
the cleaner generously using clean water. Do not
let your cleaner dry in direct sunlight near the pool.
The cleaner should be stored on its caddy so that
it dries quickly.
1.
2.
3.
4.
|
Owner's Manual
Empty all debris from the filter canister,
then rinse the canister, the filter support
and the cleaner using a hose.
thoroughly with soapy water
and a soft bristle brush.
Disconnect cleaner from the power source.
Starting at the cleaner head, remove all
coils and tangles from the cable. Lay the
cable in the sun to loosen any tangling
memory.
Place the rear wheels on the caddy and
position the cleaner vertically on the caddy
base.
Disconnect the cable from the control box.
Replace the protective cap on the control
box.