Replacing The Tyres - Zodiac VX55 4WD Owner's Manual

3. To install a new brush matt, position the
new brush matt on the roller with the bristles
facing downwards (Figure 32).
3
Figure 32. Install the New Brush
4. Thread each tab into the slot provided and
gently feed it through until the heel comes out
at the other side of the slot (Figure 33).
4
Figure 33. Pull Tabs Through Each Slot
5. Use scissors to cut the tabs at the guides, as
shown in Figure 34.
Figure 34. Cut Tabs
6. Repeat this procedure to replace the second
brush matt.
18
6.4

Replacing the Tyres

1. Pull on the inside of the old tyre to remove the
tyre lip from the wheel (Figure 35).
Figure 35. Pull the Old Tyre Over the Wheel
2. Remove the old tyre (Figure 36).
Figure 36. Remove the Old Tyre
3. To replace the tyre, position the tyre on the
wheel making sure to orient the tyre so that the
word INSIDE is toward the body of the cleaner
(Figure 37).
H0503800_REV A
1
2