Assembly; Contents; Assemble The Transport Caddy - Zodiac EvoluX iQ Series Owner's Manual

Page 6
3

Assembly

Contents

The packaging should contain the following items:
• Evolux cleaner and floating cable
• Control unit
• Manual, Quick Start Guide, and Warranty Card
• Transport and storage caddy (models: EX5000
and EX6000 only) Components (Figure 1)
a. handle frame
b. support blocks (x 2)
c. wheels (x 2)
d. wheel locking clips (x 2)
e. wheel axle / hubcap (x 2)
f. base unit
g. cleaner hook
h. caddy handle
x 2
B
A
F
Figure 1. Transport Caddy Assembly Components
When unpacking the cleaner and its components:
• Check to make sure each component is in the
box.
• Check cleaner and components for damage
during transport.
• If there are any missing parts or damage,
contact Technical Support at
1300 763 021.
Zodiac EvoluX
®
D
C x 2
x 2
x 2
E
H
G
|
iQ Robotic Pool Cleaner Owner's Manual
™

Assemble the Transport Caddy

1. Unscrew the handnut from the base (Figure
2).
Figure 2. Remove Handnut from Base Unit
2. Insert the metal handle frame tubing into
the base with notch end at the top, then
rotate so the bends are away from you.
(Figure 3).
3. Push base down (Figure 3) so the metal
handle frame is seated in the recess on the
underside of the base.
Figure 3. Connect Metal Frame to Base Unit
4. Slide the handnut over the tube and twist to
tighten onto base unit (Figure 4).