Section 2. Cleaner Specifications; General Specifications; Contents; Section 3. Getting Started - Zodiac CX40 Owner's Manual

Zodiac Robotic Cleaner | Owner's Manual
®

Section 2. Cleaner Specifications

2.1

General Specifications

The general specifications for the cleaner are as
follows:
Control Unit
supply voltage
Cleaner voltage
Installed load
Cable length
Cleaner size
(WxDxH)
Weight of Cleaner
Packed weight
Filtration
Cycle lengths
The cleaner is a double-insulated product.
A double-insulated electrical appliance is one
which has been designed in such a way that it
does not require a safety connection to ground.
The basic requirement for double-insulation is
that no single failure can result in dangerous
voltage becoming exposed so that it might
cause an electric shock and that this is achieved
without relying on an earthed (grounded) metal
casing. This is achieved by having two (2) layers
of insulating material surrounding live parts or by
using reinforced insulation. Therefore, devices
having double-insulated construction, such as this
cleaner, do not use a grounded (three-prong) cord/
plug.
2.2

Contents

The packaging should contain the following items:
• Robotic cleaner and floating cable
• Control Unit
• Printed materials
• Transport and storage caddy (CX50 only)
220-240 VAC, 50 Hz, short
circuit-proof safety isolating
type
30 V DC
150 W max
18m (CX50)
15m (CX40)
43 x 48 x 27 cm
9.5 kg
19 kg (CX50)
14 kg (CX40)
Dual filter canisters
2h 30m (all surfaces)
1h 15m (floor only)

Section 3. Getting Started

3.1

Transport Caddy (CX50 only)

1. Assemble the caddy using the separate
instructions included.
2. Press Control Unit onto the caddy hook until it
snaps and locks into position
Figure 1. Attach Control Unit to Caddy
Refer to the trolley assembly document for
trolley assembly instructions.
Page 5