Section 2. Getting Started; General Specifi Cations; Unpacking; Cleaner Control Box - Zodiac CyclonX EM14 Series Owner's Manual

Section 2. Getting Started

2.1 General Specifi cations
The general specifi cations for the cleaner are as follows:
Control box
supply
voltage
Supply voltage
Installed load
Cable length
Cleaner size
(WxDxH)
Weight of Cleaner
Filtration
Cycle lengths
This cleaner is a double-insulated product. A double-
insulated electrical appliance is one which has been
designed in such a way that it does not require a safety
connection to ground. The basic requirement for
double-insulation is that no single failure will result in
dangerous voltage becoming exposed so that it might
cause an electric shock and that this is achieved by
having two (2) layers of insulating material surrounding
live parts or by using reinforced insulation. Therefore,
devices having double-insulated construction, such as
this cleaner, do not require a grounded (three-prong)
plug.
2.3

Cleaner Control box

Surface Control
System (SCS)
for wall cleaning
(rough to smooth
surfaces)
Cleaner Error
Indicator
Select Cleaning Surface
• Floor
• Floor and Walls
4
220-240 VAC, 50 Hz; short circuit-proof
safety isolating type
30 V DC
150 W max
15m (50 ft)
41 x 42 x 25 cm
9 kg
All-purpose fi lter canister
Variable programming
SURFACE CONTROL SYSTEM
1
ROUGH
2.2

Unpacking

The packaging should contain the following items:
®
• Zodiac Robotic Cleaner
• Floating Cable
• Control box
When unpacking the cleaner and its components:
• Check to make sure each component is in the box.
• Check cleaner and components for damage during
transport.
• If there are missing parts or damage, contact
Zodiac Technical Support: 1300 763 021
2 3 4
SMOOTH
H0446500_REVB
LEDs indicating
pump strength for
SCS
Start/Stop
Cleaner