ZKTeco Green Label ProFace X User Manual

Hide thumbs Also See for Green Label ProFace X:

User manual (73 pages)

Table Of Contents

Table of Contents

Quick Links

ProFace X [TD]

User Manual

ProFace X [TD]

Version: 1.0

Date: April 2020

P a g e

| 1

ras.contact@rassecurity.com

ais.contact@ais-security.be

User Manual

www.rassecurity.com

www.ais-security.be

Table of Contents

Summary of Contents for ZKTeco Green Label ProFace X

Page 1 ProFace X [TD] User Manual User Manual ProFace X [TD] Version: 1.0 Date: April 2020 ras.contact@rassecurity.com www.rassecurity.com ais.contact@ais-security.be www.ais-security.be P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 2 Copyright © 2020 ZKTECO CO., LTD. All rights reserved. Without the prior written consent of ZKTeco, no portion of this manual can be copied or forwarded in any way or form. All parts of this manual belong to ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").
Page 3 ProFace X [TD] User Manual relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages. This manual and the information contained therein may include technical, other inaccuracies or typographical errors.
Page 4 User Manual About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers and Consumer products including battery-operated fingerprint and face-reader Door Locks.
Page 5 The general information which helps in performing the operations faster The information which is significant Care taken to avoid danger or mistakes The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 6: Table Of Contents
ANAGEMENT ..................................48 ETECTION ANAGEMENT PERSONALIZE SETTINGS ........................50 ....................................50 NTERFACE ETTINGS ......................................52 OICE ETTINGS ......................................52 CHEDULES ..................................... 54 UNCH TATES PTIONS ..................................55 HORTCUT APPINGS P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 7 EGISTRATION OF ISIBLE IGHT MAGES .......................... 77 EQUIREMENTS FOR ISIBLE IGHT IGITAL MAGE APPENDIX 2 ............................... 79 .................................. 79 TATEMENT ON THE IGHT TO RIVACY ...................................... 80 FRIENDLY PERATION P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 8: Notice For Use
The distance between the device and a user whose height is within 1.55m-1.85m is recommended to be 0.3-2.5m. Users may slightly move forwards and backwards to improve the quality of facial images captured. Facial expression and standing posture  P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 9: Palm Registration
Palm Registration Place your palm in the palm multi-mode collection area, such that the palm is placed parallel to the device. Make sure to keep space between your fingers. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 10: Face Registration
If glasses have been changed, authentication may fail. If the face without glasses has been  registered, authenticate the face without glasses. If only the face with glasses has been registered, authenticate the face with the previously worn glasses again. P a g e Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 11: Standby Interface
For the security of the device, it is recommended to register super administrator the first time you use the device. P a g e | 10 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 12: Virtual Keyboard
English keyboard. Press [123] to switch to the numeric and symbolic keyboard, and click [ABC] to return to the alphabetic keyboard. Click the input box, virtual keyboard appears. Click [ESC] to exit the input. P a g e | 11 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 13: Verification Mode
1: 1 Palm Verification mode  Click the button on the main screen to enter 1:1 palm verification mode. Input the user ID and press [OK]. P a g e | 12 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 14 If the user has registered the face and password in addition to his/her palm, and the verification method is set to palm/ face/ password verification, the following screen will appear. Select the palm icon enter palm verification mode. P a g e | 13 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 15: Password Verification
Input the user ID and press [OK]. If an employee registers palm and face in addition to password, the following screen will appear. Select the icon to enter password verification mode. P a g e | 14 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 18: Facial Verification
1:N Facial Verification  Conventional verification Compare the acquired facial images with all face data registered in the device. The following is the pop-up prompt box of comparison result. P a g e | 17 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 19 When the user enabled the Enable mask detection function, the device will identify whether the user is wearing a mask or not.The following is a popup of the comparison result prompt interface. P a g e | 18 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 20 Compare the face captured by the camera with the facial template related to the entered user ID. Press on the main interface and enter the 1:1 facial verification mode. Enter the user ID and click [OK]. P a g e | 19 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 21 ProFace X [TD] User Manual If an employee registers palm and password in addition to face, the following screen will appear. Select the icon to enter face verification mode. P a g e | 20 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 22 ProFace X [TD] User Manual After successful verification, the prompt box "successfully verified" will appear. If the verification is failed, it will prompts “Please adjust your position!”. P a g e | 21 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 23: Combined Verification
For example, if a user uses Face Registration but the verification mode is Face + Password, this user will never pass verification. P a g e | 22 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 24: Main Menu
Data Mgt. To delete all relevant data in the device. Access Control To set the parameters of the lock and the relevant access control device. P a g e | 23 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 25 To automatically test whether each module functions properly, including the screen, Autotest audio, camera and real-time clock. System Info To view data capacity, device and firmware information of the current device. P a g e | 24 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 26: User Management
During the initial registration, you can modify your ID, which cannot be modified after registration. 4） If a message "Duplicated ID" pops up, you must choose another ID. P a g e | 25 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 27 The authentication is based on the authentication method(s) that the super administrator has registered. Please refer to 1.6 Verification Method. Register palm  Click Palm to enter the palm registration page. Select the palm to be enrolled. P a g e | 26 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 28 Click Password to enter the password registration page. Enter a password and re-enter it. Click OK. If the two entered passwords are different, the prompt "Password not match" will appear. P a g e | 27 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 29 New users belong to Group 1 by default, and can be reassigned to other groups. The device supports up to 99 access control groups. Click Time Period, select the time period to use. P a g e | 28 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 30: Search For Users
Click the search bar on the user list and enter the retrieval keyword (The keyword may be an ID, surname or full name.). The system will search for the users related to the information. P a g e | 29 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 31: Edit Users
Choose a user from the list and click Delete to enter the delete user interface. Select the user information to be deleted and click OK. Note: If you select Delete User, all information of the user will be deleted. P a g e | 30 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 32: User Role
Click any item to set a defined role. Click the row of Enable Defined Role to enable this defined role. Click Name and enter the name of the role. P a g e | 31 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 33 ProFace X [TD] User Manual Click Define User Role to assign the privileges to the role. The privilege assignment is completed. Click Return. P a g e | 32 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 34 User Mgt. > New User > User Role. If no super administrator is registered, the device will prompt "Please register super administrator user first!” after clicking the enable bar. P a g e | 33 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 35: Communication Settings
When the device needs to communicate with a PC over the Ethernet, you need to configure network settings and ensure that the device and the PC are connecting to the same network segment. Click Ethernet on the Comm. Settings interface. P a g e | 34 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 36 Dynamic Host Configuration Protocol, which is to dynamically allocate IP DHCP addresses for clients via server. Display in Status Bar To set whether to display the network icon on the status bar. P a g e | 35 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 37: Pc Connection
RS232/RS485, you need to input this device ID in the software communication interface. Cloud Server Setting This represents settings used for connecting with the ADMS server. Click Cloud Server Setting on the Comm. Settings interface. P a g e | 36 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 38: Wiegand Setup
Enable Proxy Server address and port number of the proxy server. Wiegand Setup To set the Wiegand input and output parameters. Click Wiegand Setup on the Comm. Settings interface. P a g e | 37 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 40 “C “denotes the card number; “E” denotes the even parity bit; “O” denotes the odd parity bit; “F“ denotes the facility code; “M” denotes the manufacturer code; “P” denotes the parity bit; and “S” denotes the site code. P a g e | 39 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 41 The time width represents the changes of the quantity of electric charge with Pulse Width(us) high-frequency capacitance regularly within a specified time. Pulse Interval(us) The time interval between pulses. ID Type Select between User ID and badge number. P a g e | 40 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 42: System Settings
Click 24-Hour Time to enable or disable this format and select the date format. When restoring the factory settings, the time (24-hour) and date format (YYYY-MM-DD) can be restored, but the device date and time cannot be restored. P a g e | 41 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 43: Access Logs Setting
When remaining record space reaches a set value, the device will Access Logs Warning automatically display a remaining record memory warning. Users may disable the function or set a valid value between 1 and 9999. P a g e | 42 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 44: Face Parameters
1~9 seconds. Face comparison To set the facial template matching time interval as needed. Valid value: 0~9 Interval (s) seconds. Face Parameters Click Face on the System interface. P a g e | 43 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 45 LED Light Triggered This value controls the on and off of the LED light. The larger the value, the Threshold more frequently the LED light will be turned on. P a g e | 44 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 46: Palm Parameters
Under 1:N Verification Method, only when the similarity between the verifying Palm 1:N Matching palm and all registered palm is greater than this value can the verification Threshold succeed. P a g e | 45 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 47: Factory Reset
Restore the device, such as communication settings and system settings, to factory settings (Do not clear registered user data). Click Reset on the System interface. Click OK to reset. P a g e | 46 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 48: Temperature Management
When the terminal temperature is high than set value, it will shut down High Temp. to Reset automatically to protect hardware, the set range is 60~80 (℃). P a g e | 47 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 49: Detection Management
To set the value of the alarm threshold of low body temperature. Low temperature When the temperature measured during verification is lower than the set alarm threshold value, the device will give a prompt and audio alarm. P a g e | 48 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 50 Deny access without mask If this's disabled, users are allowed to access the monitoring area no matter they are wearing masks or not. P a g e | 49 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 51: Personalize Settings
You may customize interface settings, audio and bell. Click Personalize on the main menu interface. Interface Settings You can customize the display style of the main interface. Click User Interface on the Personalize interface. P a g e | 50 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 52 You can disable this function or set a value within 1-999 minutes. Main Screen Style To select the main screen style according to your personal preference. P a g e | 51 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 53: Voice Settings
Touch Prompt Select whether to enable keypad sounds. Volume Adjust the volume of the device; valid value: 0-100. Bell Schedules Click Bell Schedules on the Personalize interface. P a g e | 52 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 54 Click Edit, the editing method is the same as the operations of adding a bell. Delete a bell  On the All Bell Schedules interface, tap the bell to be deleted. Tap Delete and select [Yes] to delete the bell. P a g e | 53 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 56: Shortcut Keys Mappings
Users may define shortcuts as attendance status or functional keys. On the main interface, when the shortcut keys are pressed, the corresponding attendance status or function interface will quickly display. Click Shortcut Key Mappings on the Personalize interface. P a g e | 55 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 57: Data Management
Photo Delete Blacklist Photo To delete the photos taken during verifications which are failed. Delete All Data To delete information and attendance logs/access records of all registered P a g e | 56 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 58 All or Delete by Time Range. Selecting Delete by Time Range, you need to set a specific time range to delete all data with the period. Select Delete by Time Range. Set the time range and click OK. P a g e | 57 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 59: Access Control
In default settings, new users are allocated into the first group with the default group time zone and access combo as “1“ and set in unlocking state. P a g e | 58 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 60: Access Control Options
Normal Closed means the door is always closed when electricity is The supported verification mode includes password/face, User ID only, Verification Mode password, face only, and face + password. P a g e | 59 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 61: Time Schedule
Click Time Rule Setting on the Access Control interface. Click the grey box to input a time zone to search. Enter the number of time zone (maximum: 50 zones). P a g e | 60 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 62 ProFace X [TD] User Manual Click the date on which time zone settings is required. Enter the starting and ending time, and then press OK. P a g e | 61 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 64: Combined Verification Settings
In a door-unlocking combination, the range of the combined number N is: 0 ≤ N ≤ 5, and the number of members N may all belong to one access group or may belong to five different access groups. Click Combined Verification on the Access Control interface. P a g e | 63 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 65 The first person is from AC group 3, the second person is from AC group 5, and the third person is from AC group 8. Delete a door-unlocking combination Set all group number as 0 if you want to delete door-unlocking combinations. P a g e | 64 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 66: Anti-Passback Setup
In/Out Anti-passsback: After a user checks in/out, only if the last record is a check-out record, the user can check in again; or a check-in record, the user P a g e | 65 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 67: Duress Options Settings
1 to 999 seconds. Set the 6-digit duress password. When the user enters this duress password for Duress Password verification, an alarm signal will be generated. P a g e | 66 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 68: Attendance Search
The process of searching for attendance and blacklist photos is similar to that of searching for access records. The following is an example of searching for access records. On the Attendance Search interface, click Access Records. P a g e | 67 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 69 2. Select the time range in which the records you want to search for records of all users, click OK you want to search for. without entering any user ID. P a g e | 68 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 70 User Manual 3. The record search succeeds. Click the record in 4. The below figure shows the details of the green to view its details. selected record. P a g e | 69 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 71: Autotest
To test the RTC. The device tests whether the clock works normally and accurately Test Clock RTC with a stopwatch. Touch the screen to start counting and press it again to stop counting. P a g e | 70 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 72: System Information
Displays the device's name, serial number, MAC address, face algorithm version Device Info information, platform information, and manufacturer. Firmware Info Displays the firmware version and other version information of the device. P a g e | 71 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 73: Connect To Zkbioaccess Ep Software
Software side  Login to ZKBioAccess EP software, click System > Communication > Communication Device to set the adms service port, as shown in the figure below: P a g e | 72 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 74: Add Device On The Software
Click Search, and it will prompt [Searching……]. 3） After searching, the list and total number of access controllers will be displayed. Click Add after the device to complete adding. 4） P a g e | 73 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 75: Add Personnel On The Software
13.4 Real-time monitoring on the Software Click Prevention > Epidemic > Real-time monitoring to view all the events include the user whose temperature is over the range: P a g e | 74 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 76 Click Epidemic > Statistics panel to view the analysis of statistical data and view the personnels with normal temperature. Note: For other specific operations, please refer to ZKBioAccess EP User Manual. P a g e | 75 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 77: Requirements Of Live Collection And Registration Of Visible Light Face Images
Image 1. 8） Do not include more than one face in the capturing area. 9） 50cm - 80cm is recommended for capturing distance adjustable subject to body height. P a g e | 76 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 78: Requirements For Visible Light Digital Face Image Data
Masks and colored eyeglasses are not allowed. The frame of the eyeglasses should not shield eyes and should not reflect light. For persons with thick eyeglasses frame, it is recommended to capture two images, one with eyeglasses and the other one without. P a g e | 77 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 79 The captured person should be clearly seen, natural in color, and without image obvious twist, no shadow, light spot or reflection in face or background, and appropriate contrast and lightness level. P a g e | 78 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 80: Statement On The Right To Privacy
Thank you for choosing this hybrid biometric recognition product, which was designed and manufactured by ZKTeco. As a world-renowned provider of core biometric recognition technologies, we are constantly developing and researching new products, and strive to follow the privacy laws of each country in which our products are sold.
Page 81: Eco-Friendly Operation
The components which contain toxins or harmful elements are included due to the current economic or technical limitations which prevent their replacement with non-toxic materials or elements. P a g e | 80 Copyright©2020 ZKTECO CO., LTD. All rights reserved.
Page 82 www.rassecurity.com ras.contact@rassecurity.com ais.contact@ais-security.be www.ais-security.be...

This manual is also suitable for:

Green label proface x td

ZKTeco Green Label ProFace X User Manual

1 Notice for Use

2 Main Menu

3 User Management

4 User Role

5 Communication Settings

6 System Settings

7 Personalize Settings

8 Data Management

9 Access Control

10 Attendance Search

11 Autotest

12 System Information

13 Connect to Zkbioaccess Ep Software

Appendix 1

Appendix 2

Quick Links

Related Manuals for ZKTeco Green Label ProFace X

Summary of Contents for ZKTeco Green Label ProFace X

This manual is also suitable for:

Table of Contents