BRP Rotax 125 MAX evo Installation Instructions And Operators Manual page 28

ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
¿ Note:
The battery terminals (pos. 1) must point in the direction of the control unit.
See Fig. 35.
Æ
Connect the positive terminal (red) of the battery.
Æ
Connect the negative terminal (black) of the battery.
Æ
Install the battery cover onto the battery holder.
¿ Note:
Make sure that the two retaining lugs (pos. 1/Fig. 37) are in the notches of the
battery cover!
Æ
Tighten flange head screw (pos. 2/Fig. 37) of the battery cover.
Page 27/58
Fig. 35
Fig. 36
Fig. 37
Edition 09/2016