BRP Rotax 125 MAX evo Installation Instructions And Operators Manual page 23

ROTAX 125 MAX evo, Junior MAX evo, Mini MAX evo, Micro MAX evo
Æ
Connect pick-up connector to pick-up sensor (pos. 1). Pay attention to the
engagement of the connector.
Æ
Fix the shift contact cable and the possibly to long cable (pos. 1) of the pick-up
sensor (pos. 3) with the pre-mounted tie wrap (pos. 2) onto the mounting plate.
¿ Note:
The shift contact cable must be isolated, because there is no use on non-gear
engines.
Page 22/58
Fig. 25
Fig. 26
Fig. 27
Edition 09/2016