Advertisement
Functions and Features
•
Microprocessor-controlled ESD safe equipment.
•
4-in-1 repairing system combining Hot Air Gun, Soldering Iron, Pre-Heater, External Sensor,
Hot Air gun stand in one sophisticated package.
•
Digital control and display of hot air temperature, soldering iron temperature, air pressure, pre-
heater temperature with touch type panel controls for precision and ease of use.
•
Switchable temperature readout between Fahrenheit and centigrade.
•
Integrated hot air gun platform.
•
User configurable 1 to 30 minute idle-to-auto-stand-by mode (with 30 minutes as default) for
additional device protection and power saving.
•
Built-in auto-cooling process that protects the system and its components from excessive
heat, prolonging usage life.
•
Built-in auto-sleep mode for soldering iron.
•
Compatibility with air nozzles of various types.
•
Compatibility with different kind of soldering tips.
Construction and Preparations
A.
Main Station and Hot Air Gun Stand
Once you have removed the device from the package, remove the screw located on the bottom in the
middle of the device. This screw holds the pump in place during transport.
WARNING:
Failure to remove the screw may result in damage to the unit.
1. Detach screw from hot air gun mast.
2. Insert mast into base.
3. Insert screw and lock into position.
4. Slide in holder stopper and hot air gun arm holder.
© by WilTec Wildanger Technik GmbH
http://www.aoyue.eu
http://www.wiltec.de
http://www.teich-tip.de
Seite 28
Advertisement
