Figure 4-16 Recessed Adapter Plate Template Reference Holes - Garmin G5 Installation Manual

Recessed Adapter Plate, 115-02733-00, is required when a G5 unit is recessed in the panel. The plate can
be ordered from Garmin, or field fabricated. If field fabricated, it must be 0.090 thick 2024-T3 aluminum
per Figure 4-15 and must have some type of corrosion
protection (primer, alodine, etc.). The Recessed Adapter Plate includes reference holes and can be used
as a template for creating the recessed cutout.

Figure 4-16 Recessed Adapter Plate Template Reference Holes

4.1.2.6.1 Recess Mounting Single G5
Install a single recessed G5 as illustrated by Figure 4-17 and Figure 4-18. A G5 installation in the attitude
position is shown, but the same instructions can be used when installing a G5 in the DG or turn
coordinator positions. Modify 115-02733-00 adapter for single G5 installation per Figure 4-16. A
minimum of four No. 6 MS35206-2XX screws must be used to secure the modified mounting adapter
plate in place. Maintain 1.5D edge distance minimum.
This area intentionally blank
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual 190-01112-10
Rev. 21
Page 53