Garmin G5 Installation Manual page 137

GNC 255 Configuration
5.10.3
Config Page
Sys Configuration
NAV Configuration
SL30 Configuration
5.10.4
Config Page
Sys Configuration
Attitude Configuration
Note 1: Set configuration values and units to match the values indicated in the appropriate AFM and
document settings in the space provided.
Note 2: If the aircraft has no AFM set the values as determined by the existing placards, instrument bugs
or instrument markings.
Note 3: Existing placards related to airspeed limitations must be retained.
Note 4: Setting can remain at default setting, not supported in this configuration.
Note 5: The "Selected Course" will display when only one navigator is interfaced to the G5.
Note 6: "Selected Course 1" and "Selected Course 2" will display when dual navigators are interfaced. If
GNC255/SL30 is navigator #1, "Selected Course 1" is set to "Enabled". If GNC255/SL30 is
navigator #2, set "Selected Course 2" to "Not Enabled".
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
Config Option
RS 232 Serial Port
CDI Indicator
ARINC 429
Config Option
RS 232 Serial Port
Indicator Type
This area intentionally blank
Page 137
Configuration Setting
IO Mode = NMEA
Serial (If GNC255 is installed as #1 navigator)
Or
None (If GNC255 is installed as #2 navigator)
Tx = Low
SDI =
VOR/ILS 1 (If GNC is #1 Navigator)
Or
VOR/ILS 2 (If GNC is #2 Navigator)
Configuration Setting
No Setting
TYPE = Serial
190-01112-10
Rev. 21