Garmin G5 Installation Manual page 3

Revision Revision Date
1 07-14-2016
2 07-21-2016
3 08-08-2016
4 01-05-2017
5 03-07-2017
6 04-26-2017
7 06-20-2017
8 10/14/2017
9 10/26/2017
10 11/02/2017
11 12/04/2017
12 02/27/2018
13 03/06/2018
14 07/06/2018
15 03/13/2019
16 03/14/2019
17 04/04/2019
18 04/12/2019
19 07/18/2019
20 08/20/2019
21 12/12/2019
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
RECORD OF REVISIONS
Description
Initial Release
Revised to incorporate comments and changes driven by document
reviews.
Removed shock mount installation limitation in section 2.1, removed
shock mount replacement instructions in section 4.1 and added
engine run up details in section 5.3.7.2.
Updated Section 1.5 to show software P/N 006-B2304-02, revised
section 3.4.1 to add clarification on GPS receiver configuration,
updated Table 5-1 to add clarification on GPS receiver configuration.
Revised to add G5 DG/HSI, supporting equipment and associated
functions.
Updated GAD 29 and GMU 11 Part Numbers
Updated GMU 11 & GAD 29 Dimensions and EMI Test Harness
Revised to cover changes associated with the addition of the
G5/GAD 29B third party autopilot interfaces.
Update third party autopilot configurations and minor typographical
corrections.
Corrected Cessna Third Party autopilot model coverage and minor
wiring typographical fixes.
Changed the configuration sections to match the changes from SW
5.00 and minor typographical fixes.
Updated Section 5 to add two single ADI interconnects and related
configurations. Removed wiring interface to GFC600 and minor
typographical fixes. Updated document to reflect G5 software
version 5.20 updates. Added Section 4.2.2 for glare shield GPS ant.
Removed the installation of the glare shield GPS antenna
Updated configuration items for VNAV functionality and other
miscellaneous corrections.
Updated configuration items for GNS/GTN ARINC 429 interface and
other miscellaneous corrections.
Corrected TNC/BNC connector P/N in Table 1-2.
Added Carlisle IT contact information, and updated CAN wire P/N.
Added optional use of M27500 wire for CAN bus connections and
other minor clerical updates.
Added dual nav interface, GAD 13 (OAT), 2" navigators (GPS 175,
GNX 375). Various typographical errors corrected.
Added Piper Altimatic IIIC Autopilot to approved interfaces. Various
typographical errors corrected.
Added GNC 355, Density Altitude annunciator. Various typographical
errors corrected.
Page 3
190-01112-10
Rev. 21