Garmin G5 Installation Manual page 149

Note 3: Existing placards related to airspeed limitations must be retained.
Note 4: Setting can remain at default setting, not supported in this configuration.
Note 5: The "Selected Course" will display when only one navigator is interfaced to the G5.
Note 6: "Selected Course 1" and "Selected Course 2" will display when dual navigators are interfaced. If
GTN/GNS is navigator #1, "Selected Course 1" is set to "Enabled". If GTN/GNS is navigator #2, set
"Selected Course 2" to "Enabled".
This area intentionally blank
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual 190-01112-10
Rev. 21
Page 149