System Interconnects - Garmin G5 Installation Manual

5

SYSTEM INTERCONNECTS

This section will provide the specific wiring interconnects for the various configuration possibilities for
the G5 Attitude indicator and G5 DG/HSI installations. Each installation contains the specific G5 and or
GPS/VHF Navigator configuration table. Power and Ground wiring is identical for each installation and
is only shown in Figure 5-2.
NOTE:
The configuration tables are presented in order as the configuration pages on the G5 are
presented. To make configuration of the G5 easier configure the ARINC 429 and or RS-232
options first. This allows for hidden configurations that require the ARINC 429 or RS-232
options to be selected as appropriate.
NOTE:
For the interconnects diagramed in this section, all navigators are approved for interfacing with
one another in a dual navigator configuration. Please refer to the specific navigator installation
manual for dual unit interconnects.
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
This area intentionally blank
Page 106
190-01112-10
Rev. 21