Garmin G5 Installation Manual page 172

Config Page Config Option Configuration Setting
Main System Composite CDI Disabled
Main Indicator (Analog) Selected Course Allowed
Note 1: Set configuration values and units to match the values indicated in the appropriate AFM and
document settings in the space provided.
Note 2: If the aircraft has no AFM set the values as determined by the existing placards, instrument bugs
or instrument markings.
Note 3: Existing placards related to airspeed limitations must be retained.
Note 4: Setting can remain at default setting, not supported in this configuration.
Note 5: The "Selected Course" will display when only one navigator is interfaced to the G5.
Note 6: "Selected Course 1" and "Selected Course 2" will display when dual navigators are interfaced. If
GPS175/GNX375/GNC355 is navigator #1, "Selected Course 1" is set to "Enabled". If
GPS175/GNX375/GNC355 is navigator #2, set "Selected Course 2" to "Enabled".
This area intentionally blank
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual 190-01112-10
Rev. 21
Page 172