Garmin G5 Installation Manual page 160

GNC 300XL / GPS 155XL Configuration
5.15.3
Config Page
RS-232 Configuration
ARINC 429 Configuration
Note 1: Set configuration values and units to match the values indicated in the appropriate AFM and
document settings in the space provided.
Note 2: If the aircraft has no AFM set the values as determined by the existing placards, instrument bugs
or instrument markings.
Note 3: Existing placards related to airspeed limitations must be retained.
Note 4: Setting can remain at default setting, not supported in this configuration.
Note 5: The "Selected Course" will display when only one navigator is interfaced to the G5.
Note 6: "Selected Course 1" and "Selected Course 2" will display when dual navigators are interfaced. If
GNC300XL/GPS155XL is navigator #1, "Selected Course 1" is set to "Enabled". If
GNC255/SL30 is navigator #2, set "Selected Course 2" to "Not Enabled".
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
Config Option
CHANNEL1 IN
CHANNEL1 OUT
ARINC 429 In 1
ARINC 429 Out 1
This area intentionally blank
Page 160
Configuration Setting
Input = OFF
Output = AVIATION
Course/Heading
KING EFS 40/50
190-01112-10
Rev. 21