Garmin G5 Installation Manual page 133

Config Page
RS-232
ARINC 429
Exit Configuration Mode
DG Configuration
5.9.2
Config Page
Device Information
Attitude Configuration
Backlight
Display
Battery
GPS
RS-232
Exit Configuration Mode
Note 1: Set configuration values and units to match the values indicated in the appropriate AFM and
document settings in the space provided.
Note 2: If the aircraft has no AFM set the values as determined by the existing placards, instrument bugs
or instrument markings.
Note 3: Existing placards related to airspeed limitations must be retained.
Note 4: Setting can remain at default setting, not supported in this configuration.
Garmin G5 Electronic Flight Instrument Part 23 AML STC Installation Manual
Config Option
Input Format
Output Format
Output 1
Output 2
Input 1
Input 2
Input 3
Input 4
Config Option
Installation Type
Diagnostics/Data Log
Automatic Declutter
Current Mode
Default Mode
Minimum Photocell Input
Minimum Display Brightness
Maximum Photocell Input
Maximum Display Brightness
Filter Time Constant
HSI Page
Power Up Page
Show Battery Status
Automatic Power Off
Internal GPS Receiver
Input Format
Output Format
This area intentionally blank
Page 133
Configuration Setting
None
None
None
None
None
None
None
None
Configuration Setting
Certified Instrument
Enabled
Disabled
Automatic
Automatic
Default
Default
Default
Default
Default
Enabled
HSI
When Using Battery
On Ground Only
Disabled
None
None
190-01112-10
Rev. 21