Setting The Auto Standby Mode - Marantz PM6007 Owner's Manual

Contents Connections

Setting the Auto Standby mode

You can set the unit to automatically switch to standby mode if the unit is
not operated for 30 minutes when there is no audio input (Auto Standby
mode).
Auto Standby mode is set to off by default.
SOURCE DIRECT
Power indicator
Front panel Rear panel
Playback Settings
1
Remote control 32
unit
Tips
Press and hold SOURCE DIRECT for 5 seconds or more
to switch it on and off.
The power indicator changes as follows each time it is switched on
and off.
When auto standby mode is on: The power indicator blinks in red
0
three times.
When auto standby mode is off: The power indicator blinks in red
0
once.
Index
Appendix