Connecting Devices With Remote Control Connectors; Performing Operations By Rc On This Unit Without Visual Contact; Remotely Connecting Marantz Audio Devices - Marantz PM6007 Owner's Manual

Contents Connections

Connecting devices with remote control connectors

Performing operations by RC on this
unit without visual contact
You can connect an external IR receiver to the REMOTE CONTROL
connectors to perform operations on this unit with the supplied remote
control unit without visual contact. This might be necessary if the unit is
hidden in a cupboard or corner, so you can't directly point with the remote
control unit to the device.
To do this, disable the remote control signal receiving function "Setting the
remote signal receiving function" (v p. 33).
Infrared
Infrared
retransmitter
sensor
RC OUT
NOTE
0 When a remote control receiver unit is not connected, be sure to enable the
remote control signal receiving function. Operations cannot be performed with the
remote control if this function is disabled.
Front panel Rear panel
Playback Settings
Remotely connecting Marantz audio
devices
You can transmit remote control signals simply by connecting a Marantz
audio device to the REMOTE CONTROL IN/OUT connectors using the
remote connection cable provided with the device.
Set the remote control switch located on the rear panel of the connected
audio component to "EXTERNAL" to use this feature.
Remote control 23
unit
Tips
Index
Appendix