Connecting A Playback Device - Marantz PM6007 Owner's Manual

Contents Connections

Connecting a playback device

You can connect turntables, CD players, network audio players and tuners to this unit.
This unit is compatible with turntables equipped with a moving magnet (MM) phono cartridge. When you connect to a turntable with a low output moving
coil (MC) cartridge, use a commercially available MC head amp or a step-up transformer.
If you set this unit's input source to "PHONO" and you accidentally increase the volume without having a turntable connected, you may hear a hum noise
from the speakers.
NOTE
0 The earth terminal (SIGNAL GND) of this unit is not for safety grounding purposes. If this terminal is connected when there is a lot of noise, the noise can be reduced. Note
that depending on the turntable, connecting the ground line may have the reverse effect of increasing noise. In this case, it is not necessary to connect the ground line.
Front panel Rear panel
Playback
CD player
AUDIO
OUT
R L
Turntable
R
L
R L
AUDIO
GND
OUT
L
R
Remote control
unit
Settings
Network audio
Tuner
player
AUDIO AUDIO
OUT OUT
R L R L
R R
L L
R L R L
20
Index
Tips Appendix