Connecting And Playing Back From Digital Device (Coaxial/Optical); Switching The Filter Characteristics - Marantz PM6007 Owner's Manual

Contents Connections
Connecting and playing back from a
digital device (Coaxial/Optical)
1
Connect digital device to this unit. (v p. 22)
2
Press the input source select button (COAXIAL or
OPTICAL) to switch the input source to COAXIAL,
OPTICAL 1 or OPTICAL 2.
The indicator of the selected input source lights in blue.
0 Pressing OPTICAL changes the input source to "OPTICAL 1" or "OPTICAL
2".
3
Start playback of the digital device connected to this
unit.
0 The "COAXIAL", "OPTICAL 1" or "OPTICAL 2" input indicator flashes in
blue if this unit cannot detect the sampling frequency of the input signal.
4
Use VOLUME df to adjust the volume.
Front panel Rear panel
Playback Settings
o Switching the filter characteristics
This unit is equipped with a sound quality adjusting function which
allows users to enjoy the desired playback sound quality. This function
only works when a digital audio signal is input.
1
Filter 1
(Default)
Filter 2
Remote control 29
unit
Tips
Press FILTER 1 ・ 2.
This unit switches between Filter 1 and Filter 2 each time the button
is pressed.
FILTER 1･2
Filter Type
indicator
Offers a short impulse response for both
pre-echo and post-echo. Large amount
Lights blue of audio information clearly reproduces
deep stereo imaging and the relative
position of the sound source.
Both pre-echo and post-echo are slightly
Lights purple longer. The sound characteristics is edge
and powerful.
Index
Appendix
Features