Setting The Auto Standby Mode - Marantz PM5005 Owner's Manual

Contents Connections

Setting the Auto Standby mode

You can set the unit to automatically switch to standby mode if the unit is
not operated for 30 minutes when there is no audio input (Auto Standby
mode).
Auto Standby mode is set to on by default.
SOURCE DIRECT
Standby indicator
Front panel Rear panel
Playback Settings
Turning Auto Standby mode off
1
Turning Auto Standby mode on
1
You can also press SOURCE DIRECT on the remote control unit for this operation.
Remote control
30
unit
Tips
Press and hold SOURCE DIRECT for more than 5
seconds to turn the Auto Standby mode off.
The power indicator flashes once.
Press and hold SOURCE DIRECT for more than 5
seconds to turn the Auto Standby mode on.
The standby indicator flashes three times.
Index
Appendix