Contents
Connections
No sound comes out
No sound comes out of speakers.
Check the connections for all devices. (v p. 15)
0
Insert connection cables all the way in.
0
Check that input connectors and output connectors are not reversely connected.
0
Check cables for damage.
0
Check that speaker cables are properly connected. Check that cable core wires come in contact with the metal part on speaker terminals. (v p. 16)
0
Securely tighten the speaker terminals. Check speaker terminals for looseness. (v p. 16)
0
Check that the proper input source is selected. (v p. 27)
0
The volume is set to the minimum level. Adjust the volume to a suitable level. (v p. 27)
0
Cancel the muting mode. (v p. 27)
0
Check the settings of the SPEAKERS A/B buttons. (v p. 27)
0
The COAXIAL, OPTICAL 1 or OPTICAL 2 input indicator is flashing.
Check the connection of the Coaxial digital cable or Optical cable. (v p. 22)
0
Set the Digital Audio output signal of the connected device to 2 channel linear PCM. (v p. 43)
0
Desired sound does not come out
No sound comes out of a specific speaker.
Check that speaker cables are properly connected. (v p. 16)
0
Adjust the BALANCE control knob. (v p. 28)
0
The left and right of stereo sound is reversed.
Check whether the left and right speakers are connected to the correct speaker terminals. (v p. 17)
0
Front panel
Rear panel
Playback
Settings
Remote control
41
unit
Tips
Index
Appendix