Sun Microsystems Enterprise 10000 System Upgrade Instructions page 4

Shut Down all Domains
The following procedure is for halting the operating system on a domain.
1. Log in to the SSP as user ssp.
2. When prompted for the SUNW_HOSTNAME, use either the platform name or the
name of an existing domain.
3. Log into the domain as root.
4. Open a netcon session to the domain in another window.
5. Notify users that the system is going down.
6. Halt the system using the appropriate Solaris commands.
The basic command for halting the system should be shutdown(1M). Refer to the
man page for options and other considerations. For example:
# cd /
# shutdown -i0 -g0 -y
7. Wait for the system-halted message and the OBP prompt to be displayed on the
netcon console window.
8. Repeat on each domain before proceeding.
Powering Off a System Board
Power off all system boards by typing:
ssp# power -off -all
Refer to power(1M) for more information.
2 Sun Enterprise 10000 336-Mhz Processor Module Upgrade Instructions • July 1998