Silicon Laboratories Si4010 Software Programming Manual page 46

AN370
It is important to note that vDmdTs_RunForTemp() forces the DMD interrupt EDMD flag
and the global interrupt enable EA flag to be enabled:
EDMD = 1;
EA = 1;
Inputs:
biSampleSkipCount: (BYTE) Parameter passed to the vDmdTs_Setup() function.
It represents the number of output samples to skip before collecting values in the
function vDmdTs_IsrCall(). Upon startup the output of the demodulator is not
valid for about 3 samples. biSampleSkipCount allows for configuration of how
many samples needs to be skipped. Do not use value less than 3.
Outputs:
None
46 Rev. 1.0