Silicon Laboratories Si4010 Software Programming Manual page 43

Outputs:
Temperature: (int) Signed output representing temperature in internal temperature
units, representing temperature as 220 lsb/degC nominal scale with nominal zero
point at 25degC. e.g., value 1100 corresponds to 30degC. This value is only for
API internal use and is not calibrated for accurate ambient temperature measure-
ment.
vDmdTs_ClearDmd
Description: Clears the temperature sensor demodulator hardware.
Inputs:
None
Outputs:
None
vDmdTs_ClearDmdIntFlag
Description: Clears the temperature sensor demodulator interrupt flag.
Inputs:
None
Outputs:
None
Rev. 1.0
AN370
43