Silicon Laboratories Si4010 Software Programming Manual page 75

7.11.2. ODS Module Functions
vOds_Setup
Description: Set up the ODS serializer registers based on the value of the input structure
of type tOds_Setup.
All ODS related hardware registers with the exception of ODS_CTRL are cleared and
overwritten by the new values. The function sets the following hardware registers:
ODS_TIMING, ODS_RATEL, ODS_RATEH, ODS_WARM1, and ODS_WARM2. It sets
the FSK_MODE field in the ODS_CTRL register as well.
The input structure items should be set based on the calculation results from si4010_cal-
c_regs.xls spreadsheet.
Inputs:
priSetup: (pointer to tOds_Setup structure instance residing in XDATA) For con-
tents of tOds_Setup structure see table above.
Outputs:
None
vOds_Enable
Description: Enables or disables the ODS serializer.
Inputs:
biSetEnable: (BYTE) ODS enable control.
Outputs:
None
1: Enable ODS serializer. Any input value other than 0 enables the ODS.
0: Disable ODS serializer
Rev. 1.0
AN370
75