Flying; Flying A Vertical Array With A15I-Bump - L-Acoustics A15i Series Owner's Manual

Flying

Flying a vertical array with A15i-BUMP

Type of deployment
Rigging accessories
Additional accessories
Min number of operators
Rigging plates
x2 x2
A15iFOCUS-LINK
Rigging plates
for A15i Focus
Risk of falling objects
Verify that no unattached items remain on the product or assembly.
Secondary safety
Use available holes on the rigging accessories to implement a secondary safety.
Flying hybrid arrays
The KS21i subwoofers must always be on top of the array.
Refer to Soundvision for maximum congurations.
Array orientation
Under A15i-BUMP, the enclosure HF section can be oriented both ways.
Under KS21i, the HF section is on the same side as the subwoofer vent.
A15i owner's manual (EN) version 1.0
own array
A15i-BUMP
A15i Wide/Focus / KS21i rigging plates
2 x Ø12 mm shackle WLL 1 t (provided)
M-BARi (optional)
A15i-TILT (optional)
M6x18 rigging screws (provided)
M6 nuts (provided)
T30 Torx bit
3
x2 x2
A15iWIDE-LINK
Rigging plates
for A15i Wide
x2 x2
KS21i-LINK
Rigging plates
for KS21i
Rigging procedures
x2 x2
KS21i-SLINK
Rigging plates for
A15i under KS21i
53