L-Acoustics A15i Series Owner's Manual page 66

Rigging procedures
Assembly
Procedure
1. Prepare the rst enclosure by removing the placeholder screws and securing rigging plates on both sides.
A15i Wide/Focus
2. Secure A15i-RIGBAR at the rear of the enclosure.
Secure A15i-RIGBAR at the front for a positive initial site angle.
A15i Wide/Focus
3. Select the pick-up point and raise the array.
4. Follow the relevant procedure in
What to do next
Adding a pullback with A15i-RIGBAR
66
Flying a vertical array with A15i-BUMP
(p.67)
KS21i
KS21i
(p.53) from step 4 to the end.
A15i owner's manual (EN) version 1.0