Flying With A U-Bracket - L-Acoustics X15 HiQ Owner's Manual

Rigging procedures

Flying with a U-bracket

type of deployment
rigging accessories
additional material
min number of operators
Additional safety for own arrays
When ying an enclosure or an array, use the M8 DIN580 threaded insert to implement a secondary safety.
The procedure is shown with X-US1215.
The same procedure applies for X-UL15.
Assembly
Procedure
1. Drive the knobs in the inserts on the enclosure.
Stop when the threading is halfway in.
2. Place the U-bracket around the assembly.
Adjust the knobs on both sides so that the safety washer is between the hook and the enclosure.
54
ying
X-US1215 or X-UL15
truss clamp
1
X15 HiQ owner's manual (EN) version 1.0