Flying
Securing LA-RAK III on L2-BUMP with LA-RAKMOUNT
Type of deployment
Rigging accessories
Tools
Min number of operators
Risk of falling objects
Verify that no unattached items remain on the product or assembly.
Procedure
1. Position and secure the two rails of LA-RAKMOUNT to L2-BUMP with the 8 M8×30 screws.
Use the electric screwdriver. Set the torque to 5 N.m.
2. Install L2-BAR on each side of L2-BUMP.
L2 owner's manual (EN) version 2.0
own array
L2-BUMP
LA-RAKMOUNT
8 M8×30 screws (provided with LA-RAKMOUNT)
2 L2-BAR
4 Ø19 mm shackles WLL 3.25 t
screwdriver
T30 Torx bit
2
5 N.m
T30
Rigging procedures
57