Flying Syva - L-Acoustics Syva Rigging Manual

Rigging procedures

Flying Syva

type of deployment
rigging accessories
tools
additional material
min number of operators
Secondary safety
Secure a DIN-580 eye bolt to the dedicated insert on the enclosure to implement a secondary safety.
Access to the screw terminal is limited after rigging.
Prepare the cabling before rigging the system.
About this task
Available site angles:
-10° -7.5° -5°
Procedure
Remove the backplate from Syva and secure Syva Bar on the enclosure.
Store plates and unused screws in Syva Cov.
Syva rigging manual (EN) version 1.1
-2° 0° +2° +5°
T30
own
Syva Bar
CLAMP250 (optional)
torque screwdriver
T30 Torx bit
1 Ø12 mm shackle WLL 1 t (provided)
1
5 N.m
T30
22