ADTRAN T200 Installation And Maintenance Practice page 15

This unit includes two terminal emulation modes. The
desired terminal mode can be selected from the
Terminal Modes Screen (Figure
pressing while on any screen toggles between
C +T
TRL
the two terminal modes.
The Manual Update Mode allows the user to manually
update the provisioning option screens. This mode
supports efficient print screen and log file utilities for
storage of key provisioning parameters, alarm or perfor-
mance history and current system status. "3 SPACES
CIRCUIT ID:
MANUAL UPDATE MODE:
* You can print or log screens
* No text is highlighted
* "3 SPACES TO UPDATE" appears at the top of each screen,
reminding you to press the spacebar 3 times to update the screen
* There is a delay between screen changes & updates
* After 30 min. of no interaction, a new baud rate search is begun
* Ignores input until screen is finished printing.
REAL-TIME UPDATE MODE:
* Faster of the two modes
* You cannot print screens to a log file
* Highlighting is enabled
* Recommended for daily operation
61223024L2-5A
17). Additionally,
Press ESC to return to previous menu
TERMINAL MODES MENU
Press CTRL+T to toggle update modes on any screen.
Figure 17. Terminal Modes Menu Screen
Issue 1, December 2003
TO UPDATE" appears at the top of each screen. By
pressing the space bar 3 times, the screen will be
refreshed and will reflect the most current circuit condi-
tions and provisioning options.
The second terminal emulation mode is the Real Time
Update Mode (VT100). This mode provides real time
updating of HDSL2 circuit conditions and provisioning
options as changes occur. The Real Time update mode
is the default mode.
10/29/03 09:29:45
15