Cerabar PMC11, PMC21, PMP11, PMP21
CE mark
RoHS
RCM-Tick marking
EAC conformity
Approval
Safety Instructions (XA)
Endress+Hauser
Certificates and approvals
The device meets the legal requirements of the relevant EC directives. Endress+Hauser confirms that
the device has been successfully tested by applying the CE mark.
The measuring system complies with the substance restrictions of the Restriction on Hazardous
Substances Directive 2011/65/EU (RoHS 2).
The supplied product or measuring system meets the ACMA (Australian Communications and Media
Authority) requirements for network integrity, interoperability, performance characteristics as well
as health and safety regulations. Here, especially the regulatory arrangements for electromagnetic
compatibility are met. The products are labelled with the RCM- Tick marking on the name plate.
The PMC21, PMP21 and PMP23 devices meet the legal requirements of the applicable EAC
directives. These are listed in the corresponding EAC Declaration of Conformity along with the
standards applied.
Endress+Hauser confirms successful testing of the device by affixing to it the EAC mark.
CSA C/US General Purpose
Depending on the approval, the following Safety Instructions (XA) are supplied with the device. They
are an integral part of the Operating Instructions.
Device
Directive
PMP21
ATEX II 1/2G Ex ia IIC T4 Ga/Gb
PMC21
ATEX II 2G Ex ia IIC T4 Gb
PMC21
ATEX II 3G Ex ec IIC T4 Gc
PMP21
PMC21
FM IS Cl. I, Div.1 Gr. A-D T4
PMP21
PMC21
CSA C/US IS Cl. I Div. 1 Gr. A-D
PMP21
PMC21
EAC Ex ia IIC T4 Ga/Gb
PMP21
PMC21
IEC Ex ia IIC T4 Ga/Gb
PMP21
PMC21
NEPSI Ex ia IIC T4
PMP21
PMC21
TIIS Ex ia IIC T4
PMP21
1)
Product Configurator order code for "Approval"
The nameplate indicates the Safety Instructions (XA) that are relevant to the device.
Documentation
Option
XA01271P
BA
XA01271P
BB
XA01533P
BC
XA01321P
FA
XA01322P
CB
XA01540P
GA
XA01271P
IA
XA01363P
NA
In preparation
TA
A0029561
1)
43