Cerabar PMC11, PMC21, PMP11, PMP21
Design, dimensions
Section
Electrical connection
Housing height
Process connection height
Installation distance
Electrical connection
A
M12x1
A0024426
Engineering unit mm (in)
Position Designation
A
M12 plug IP65
(Additional dimensions → 47)
A
M12 plug IP65/67
(Additional dimensions → 47)
B
M12 plug IP66/67
Endress+Hauser
Mechanical construction
• The following dimensions have been rounded up to whole measurements.
• Exact dimensions are available in the Product Configurator on the Endress+Hauser website:
www.endress.com
→ Product finder → On the product page, click the "Configure" button to the
right of the product photo.
Device height
The device height is calculated from
• the height of the electrical connection
• the height of the housing and
• the height of the individual process connection.
The individual heights of the components are listed in the following sections. To calculate the device
height simply add up the individual heights of the components. Where applicable also take into
consideration the installation distance (space that is used to install the device). You can use the
following table for this purpose:
Page
Height
→ 29
(A)
→ 30
(B)
→ 32
(C)
→ 35
-
(D)
B
M12x1
A0024427
Material
Housing cap made of plastic
Housing cap made of plastic
Housing cap made of metal
Example
D
A
B
C
C
34 (1.34)
Weight kg (lbs) Device
0.012 (0.03)
PMC11
PMP11
0.012 (0.03)
PMC21
PMP21
0.030 (0.07)
PMC21
PMP21
A0027252
D
r ³ 102 (4.02)
A0024428
1)
Option
L
M
Plug connector with cable
can be ordered as an accessory → 47
In the case of Ex ec type of protection,
the housing cap is made of metal.
D
A
B
C
A0022829
A0024429
29