Documentation - Endress+Hauser Cerabar PMC11 Technical Information

Cerabar PMC11, PMC21, PMP11, PMP21

Documentation

Endress+Hauser
The document types listed are available:
In the Download Area of the Endress+Hauser Internet site: www.endress.com → Download
Brief Operating Instructions (KA): getting the 1st measured value quickly
These instructions contain all the essential information from incoming acceptance to initial
commissioning.
Operating Instructions (BA): your comprehensive reference
These Operating Instructions contain all the information that is required in various phases of the life
cycle of the device: from product identification, incoming acceptance and storage, to mounting,
connection, operation and commissioning through to troubleshooting, maintenance and disposal.
Safety Instructions (XA)
Depending on the approval, the following Safety Instructions (XA) are supplied with the device. They
are an integral part of the Operating Instructions.
Device Directive
PMP21 ATEX II 1/2G Ex ia IIC T4 Ga/Gb
PMC21 ATEX II 2G Ex ia IIC T4 Gb
PMC21 ATEX II 3G Ex ec IIC T4 Gc
PMP21
PMC21 FM IS Cl. I, Div.1 Gr. A-D T4
PMP21
PMC21 CSA C/US IS Cl. I Div. 1 Gr. A-D
PMP21
PMC21 EAC Ex ia IIC T4 Ga/Gb
PMP21
PMC21 IEC Ex ia IIC T4 Ga/Gb
PMP21
PMC21 NEPSI Ex ia IIC T4
PMP21
PMC21 TIIS Ex ia IIC T4
PMP21
1) Product Configurator order code for "Approval"
The nameplate indicates the Safety Instructions (XA) that are relevant to the device.
Documentation Option
XA01271P BA
XA01271P BB
XA01533P BC
XA01321P FA
XA01322P CB
XA01540P GA
XA01271P IA
XA01363P NA
In preparation TA
1)
5