Certificates And Approvals; Ce Mark; Rcm-Tick Marking; Ex Approvals - Endress+Hauser Cerabar PMP71B Technical Information

Cerabar PMP71B

CE mark

RCM-Tick marking

Ex approvals

EAC conformity

Drinking water approval

Overfill protection (in
preparation)
Functional safety SIL/
IEC 61508 Declaration of
Conformity (optional)

Marine approval (pending)

Radio approval

Endress+Hauser

Certificates and approvals

Certificates, approvals and other documentation that are currently available can be accessed on
the Endress+Hauser website:
The device meets the legal requirements of the relevant EC directives. Endress+Hauser confirms that
the device has been successfully tested by applying the CE mark.
The supplied product or measuring system meets the ACMA (Australian Communications and Media
Authority) requirements for network integrity, interoperability, performance characteristics as well
as health and safety regulations. Here, especially the regulatory arrangements for electromagnetic
compatibility are met. The products bear the RCM-Tick marking on the nameplate.
• ATEX
• CSA (in preparation)
• NEPSI (in preparation)
• INMETRO (in preparation)
• KC (in preparation)
• EAC (in preparation)
• JPN (in preparation)
• Also combinations of different approvals
All the data related to explosion protection is provided in separate Ex documentation which is also
available upon request. The Ex documentation is supplied as standard with all devices approved for
use in explosion hazardous areas.
Additional approvals in preparation.
Explosion-protected smartphones and tablets
If used in hazardous areas, mobile end devices with an Ex approval must be used.
The device meets the legal requirements of the applicable EAC Directives. These are listed in the
corresponding EAC Declaration of Conformity along with the standards applied.
Endress+Hauser confirms successful testing of the device by affixing to it the EAC mark.
NSF/ANSI 61 drinking water approval
The device is tested in accordance with the approval guidelines for overfill protection units (ZG-
ÜS:2012-07) as overfill protection as per Section 63 of the German Water Resources Act (WHG).
The devices with a 4-20 mA output signal have been developed according to the IEC 61508
standard. These devices can be used to monitor the process level and pressure up to SIL 3. For a
detailed description of the safety functions, settings and functional safety data, see the "Functional
Safety Manual".
• ABS (American Bureau of Shipping)
• LR (Lloyd' s Register)
• BV (Bureau Veritas)
• DNV GL (Det Norske Veritas / Germanischer Lloyd)
Displays with Bluetooth LE have radio licenses according to CE and FCC. The relevant certification
information and labels are provided on display.
www.endress.com → Downloads.
A0029561
71