Firmware Update - 3xLogic VISIX Gen III Series User Interface Manual

Setup - System Setup

Firmware Update

1
2
3
Version Information - Shows the current Firmware Version in the system.
1
Web Update - Select the Firmware file to update to on your computer by clicking Select File.
2
Start F / W Update - Click this button to start update. Progress of uploading will be displayed using a progress bar.
3
If you assign the wrong file name, an error message will be shown.
Warning:
1. Do not turn off the power of camera during the Firmware update. Otherwise, the system can hang and the device may
become unusable. If updating is finished, the system will be rebooted automatically.
2. Please make sure to check the 'Notice' shown on screen.
If firmware update is completed, the camera will reboot automatically and 'Setup window' will be closed.
www.3xlogic.com | 877 3xLOGIC | helpdesk@3xlogic.com
Pg. 64