Record Configuration - 3xLogic VISIX Gen III Series User Interface Manual

Setup - Record Setup

Record Configuration

1
2
3
4
5
6
7
8
Enabled - The Recording function can be enabled or disabled.
1
Storage Device - This item cannot be selected. Shows the saved SD Card.
2
File Type - Select the recording file type.
3
Currently only supports MP4 Type.
Storage - Select the storage type. SD Card(Disabled) selection is not allowed.
4
Continous - If continous mode is turned on, start continuous recording without any other setting. This settings is indepedent of
5
recording to a VIGIL Server.
Pre Duration - Define duration of pre-recording before an event.
6
Post Duration - Define duration of post-recording image transfer after an event.
7
Click Save to save the current settings.
8
Click 'Cancel' to return to the previous setting.
www.3xlogic.com | 877 3xLOGIC | helpdesk@3xlogic.com
Pg. 50