Table of Contents
Advertisement
User Guide • SC5-FESTIVAL • CompactPCI
Manufacturer Mode Jumper (J-MFG)
The jumper J-MFG is used to bring the board into the manufacturer mode. This is necessary only on
board production time and should not used by customers. For normal operation the jumper should
be removed. The pin header J-MFG is not stuffed on the SC5-FESTIVAL by default.
© EKF
1
J-MFG
Jumper
Normal operation
1)
Removed
Jumper Installed
Entering Manufacturer Mode
1)
This setting is the factory default
®
Serial CPU Board
J-MFG
Function
-75-
ekf.com
Advertisement
Table of Contents
Need help?
Do you have a question about the CompactPCI SC5-FESTIVAL and is the answer not in the manual?