Serverboard Battery; Dvd-Rom Laser; Mainboard Replaceable Soldered-In Fuses; Figure 4-1 Installing The Onboard Battery - Silicon Graphics Rackable H2106-G7 System User's Manual

4: System Safety

Serverboard Battery

!

DVD-ROM Laser

!

Mainboard Replaceable Soldered-in Fuses

28
Caution: There is a danger of explosion if the onboard battery is installed upside down,
which will reverse its polarities (see
same or an equivalent type recommended by the manufacturer. Check with your service
representative if you have any questions. Dispose of used batteries according to the
manufacturer's instructions.
Lithium battery
Battery holder
Figure 4-1
Installing the Onboard Battery
Caution: This server may have come equipped with a DVD drive. To prevent direct
exposure to the laser beam and hazardous radiation exposure, do not open the drive enclosure
or use the unit in any unconventional way.
Important: If your system comes with self-resetting PTC (Positive Temperature Coefficient)
fuses on the serverboard, they must be replaced by trained service technicians only. The new fuse
must be the same or equivalent as the one replaced. Contact your technical support organization
for details and support.
Figure 4-1). This battery must be replaced only with the
007-5683-004