Silicon Graphics Rackable H2106-G7 System User's Manual page 102

7: BIOS
Lane Reversal
Hot Plug Support
NB-SB Port Features
NB-SB Link APSM
Link Width
NP NB-SB VC1 Traffic Support
Compliance Mode
GPP1 ~ GPP3b Core Settings
Core Configuration
78
Use this setting to Enable or Disable Lane Reversal.
Use this setting to set Hot Plug Support. Options include Disabled and Native.
Use this to set the NB-SB Link ABSM. Options include L1 and Disabled.
This setting allows you to set the Link Width for the NB-SB port. Options include Auto, x1, x2
and x4.
Use this setting to Disable or Enable NP NB-SB VC1 traffic support.
Use this setting to Enable or Disable Compliance Mode for the NB-SB port.
These submenus allow you to specify GPP core settings. Each submenu allows you to define the
same settings listed below.
This setting allows you to configure core configuration. Options include Auto, 1x16 and 2x8.
007-5683-004