Ht3 Link Power State; Unit Id Clumping; Ht Link Tristate; Nb Deemphesis Level - Silicon Graphics Rackable H2106-G7 System User's Manual

HT3 Link Power State

Unit ID Clumping

HT Link Tristate

NB Deemphesis Level

IOMMU

Primary Video Controller

PCI Spread Spectrum

007-5683-004
This setting allows you to configure the HT3 Link power state. Options include Auto, LS0, LS1,
LS2 and LS3.
Use this setting to configure Unit ID clumping. Options include Disabled, Auto, UnitID 2/3,
UnitID B/C and UnitID 2/3 & B/C.
This setting allows you to configure the HT Link Tristate. Options include Auto, Disabled,
CAD/CTL and CAD/CTL/CLK.
Use this to set the NB deemphesis level. Options include Disabled, 0.4 dB, 1.32 dB, -2.08dB, 3.1
dB, 4.22 dB, 5.50 dB and 7.05 dB.
This setting is used to disable or set the GART size in systems without AGP. Options include AGP
Present, Disabled, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB and 1 GB.
Use this setting to specify the primary video controller boot order. Options include
PCIE-GPP1-GPP2-GPP3a-PCI, PCIE-GPP2-GPP1-GPP3a-PCI,
PCIE-GPP3a-GPP1-GPP2-PCI or PCI-PCIE-GPP1-GPP2-GPP3a.
Use this setting to Enable or Disable PCI Spread Spectrum in the system.
Main Menu
81