Debug Options; Peer To Peer Among Gpp1/Gpp2; Reset To Training Delay (Ms); Receiver Detection Pooling (Ms) - Silicon Graphics Rackable H2106-G7 System User's Manual

7: BIOS

Debug Options

Peer to Peer Among GPP1/GPP2

Reset to Training Delay (ms)

Receiver Detection Pooling (ms)

Hide Unused PCIE P2P Bridges

GFX Card Workaround

Debug Bus Configuration

PCIE Debug Bus

Hyper Transport Configuration

HT Extended Address

80
Use this setting enable or disable Peer to Peer among GPP1/GPP2. Options include Auto, Enabled
and Disabled.
Use the +/- keys to change the reset to training delay time setting. The default is 50.
Use the +/- keys to change the receiver detection pooling time setting. The default is 180.
Use this setting to Enable or Disable the hiding of unused PCIE P2P bridges.
This setting allows you to Enable or Disable the GFX Card workaround on your system.
This setting Enables or Disables PCIE debugging of the bus.
This setting allows you to Enable or Disable the HT extended address. Options include Enabled,
Disabled and Auto.
007-5683-004