Motorola MTM800 Product Information Manual page 248

3-134
This profile is used by the terminal after the emergency call has been set up.
At defined time intervals the terminal checks its location against that of the last reported position.
A distance based location report is only sent if the distance between the measurement and the last
reported position is higher than the distance threshold. The real moved distance could be higher i.e.
going back or going round the first point. Also the excursion may escape notice because the journey
time is within the time period between consecutive checks.
See Paragraph 30.3 "Normal Periodic Profile" for a description of the Field Name options. The
defaults are to be seen in the screen above.
Additional field:
30.4.1 GPS Emergency Report Period
This is the interval (in seconds) at which periodic Location Reports are sent in Emergency Mode (0
means never).
The range for this setting is 0 - 2147483 seconds, the default is 30 seconds.
30.5 MS Moved Profile
At defined time intervals the terminal checks its location against that of the last reported position.
A distance based location report is only sent if the distance between the measurement and the last
reported position is higher than the distance threshold. The real moved distance could be higher i.e.
going back or going round the first point. Also the excursion may escape notice because the journey
time is within the time period between consecutive checks.
See Paragraph 30.3 "Normal Periodic Profile" for a description of the Field Name options.
Additional field:
30.5.1 GPS Report Distance
The threshold entry in this field defines the distance moved after which the terminal will send an
Unsolicited Location report
A distance based location report is only sent if the distance between the measurement and the last
reported position is higher than the distance threshold. The real moved distance could be higher i.e.
6866537D87-F Chapter 3 - MTM800 Product Information Manual
Customer Programming Software (CPS)
September 2008