Motorola MTM800 Product Information Manual page 212

3-98
24.2.2.5 Receive Call to DMO Partnership Networks
It is possible that different network providers will share Gateway access, thus allowing terminals of
one system to access terminals of another system via a Gateway. These calls are referred to as
Inter-MNI or Intra-MNI calls and are dependent upon the direction of the call.
• Inter-MNI (Mobile Network Identity - made up of the Country Code & ISSI) calls are calls
between own system terminals via own system Gateway, or received calls, on own system
Gateway, from a terminal of another system.
• Intra-MNI calls are calls to another system terminal via the other system Gateway.
Note: A terminal on its own Gateway is making Inter-MNI calls, a terminal using another system's
gateway is making Intra-MNI calls.
An incoming group call addressed to MNIRCVD and SSIRCVD will be accepted by the terminal if:
• SSIRCVD (Short Subscriber Identity Received) equals the selected GSSI, and:
i.
i.
• SSIRCVD = 11..112 and:
i.
i.
i.
i.
24.2.2.6 Network MCC
This field defines the country code of the DMO Gateway.
24.2.2.7 Network MNC
This field defines the network code of the DMO Gateway.
24.2.2.8 TMO Mapping
Mapping between DMO and TMO talkgroups. The mapped TMO talkgroup is selectable and derived
from the Talkgroup list.
It's possible to associate a DMO talkgroup configuration to a TMO talkgroup configuration. This
means that if you are on TMO talkgroup 3, for example, then you are not bound to use DMO
talkgroup 3 should the user switch to DMO. In your DMO fleetmap, it's possible to associate any
TMO talkgroup to ANY DMO talkgroup, so in this example you could make DMO talkgroup number
23 the relevant DMO talkgroup for TMO talkgroup number 3.
When copying DMO or TMO talkgroup list to another new codeplug, mapping will be lost. Use
cloning to keep values.
You cannot map a DMO talkgroup to an unprogrammed TMO talkgroup.
To select the correspondent TMO talkgroup, put the pointer into the field value, click on the arrow,
and drag the pointer to the desired talk group.
6866537D87-F
SSIRCVD equals the group MNI, or
If SIM is not supported, the received call to partnership networks is YES and MNIRCVD
exists in the DMO Partnership List.
MNIRCVD = 11..112, or
MNIRCVD = the Home MNI, or
MNIRCVD = selected group MNI, or
If SIM is not supported, the received call to partnership networks is YES and MNIRCVD
exists in the DMO Partnership List.
Chapter 3 - MTM800 Product Information Manual
Customer Programming Software (CPS)
September 2008