Motorola MTM800 Product Information Manual page 125

File Menu
The codeplug is displayed in the 'Tree' format on the left of the screen. The trunk is made up of the
available main menu items and as each is selected, it opens its sub menus as branches towards the
screen centre. The sub menus may in turn have sub menus that also open to the right of the screen.
4.6 Write Phone
This option is used to Write codeplug data to (program) the phone while preserving the sensitivity
field values, i.e. tuning data. Use this function only to write a codeplug that was originally read or
loaded from the same phone, the source and target phones must be one and the same.
The CPS will display a progress bar and status messages as necessary.
CAUTION:
Do not disconnect the programming cable from the phone during the write operation. This will
destroy the terminal.
4.7 Copy Phone
This option will copy the displayed codeplug to a connected terminal of the same model.
4.8 Copy Wizard
This is a 2 step feature that enables cloning of codeplug data from a master codeplug to one or
more terminals of the same model.
Select the codeplug blocks (up to 55) to be copied and write the codeplug data to one or more
terminals - all in one operation.
This function is used only for compatible terminal models - i.e.terminals belonging to the same
frequency range and operating in the same network.
TIP: Use Copy Wizard to clone multiple terminals with the same set of codeplug data. The master
codeplug is read from the master terminals and activated in the CPS window. Connect the next
terminal(s) and click the Write button.
September 2008
Chapter 3 - MTM800 Product Information Manual
3-11
6866537D87-F