Motorola MTM800 Product Information Manual page 172

3-58
16.11 Key Fail Indication Timer
This option is used to set the periodic time interval for the Key Fail Alert.
See Paragraph 16.1 "Periodic End-To-End Key Failure Notice" above.
16.12 Re-Key Ongoing Timer
This option is used to set the response time interval after which the user will be alerted that no
response has been received from the KMF to a re-key request.
16.13 Re-Key Completion Timer
The entry in this field defines the time after which the user is alerted when a re-key request has not
been completed.
16.14 Mandatory On Relaxation
This check box determines whether or not a received clear call is Accepted/Unmuted or Rejected/
Muted when the default mode of the accosiation is Mandatory On.
16.15 Infinit End-To-End Key Retention
Selecting this option enables the terminal to permanently store encryption keys even when the
battery is removed.
16.16 End-To-End Encryption in Class of MS
This field indicates whether the terminal is E2E capable or not. This is a sub-element of Class of
terminal Information element.
This field is set to Enabled in power-up if the terminal is equipped with the UCM.
Turn the check box on (Enable/Encrypted) or off (Disable/Clear) by clicking in the check box.
17 Clock System Broadcast Information
6866537D87-F Chapter 3 - MTM800 Product Information Manual
Customer Programming Software (CPS)
September 2008