Motorola MTM800 Product Information Manual page 145

Tools Menu (Administrator Login)
This page lists three fields displaying the last selected path:
• Default Data Path — specifies the default path to the drive and folder (or directory) where the
codeplug file is located.
• Default Software Path — specifies the default path to the drive and folder (or directory)
where the subscriber (flashing) software is located.
• Default Backup Path — specifies the default path to the drive and folder (or directory) where
the codeplug backup files are located.
• Default Flash Packs Path — specifies the default path to the drive and folder (or directory)
where the Flash Packs files are located.
Each field has its accompanying Browse button.
Click any Browse button to bring up the Browse dialogue box, open the drivers/folders and select
the path to the directory where the desired file(s) will be stored/located.
To confirm the selection press OK. The path will be displayed in the relevant field of the Directories
page.
7.7.4.5 Log
Logging Options
Allows the logging feature to be enable/disable and to set up options for the Log file.
To enable the logging, from Logging Mode drop down list select Normal or TEI & ITSI, SFPG and
Normal. To disable the logging, from Logging Mode drop down list select Off.
Enable logging:
If logging is enabled, the CPS will write to the log file basic statistical information such as data, time,
operation name, operation data and operation result for main CPS functions activated by user
during CPS sessions.
When launched, the CPS will check whether the Log file exists or not in the directory, which is
specified in the Log file path field.
If the file does not exist, the CPS will automatically create it with the name cps_user.log.
An already existing log file will be appended to the newly recorded information.
September 2008
Chapter 3 - MTM800 Product Information Manual
3-31
6866537D87-F