Motorola MTM800 Product Information Manual page 195

Ergonomic Parameters
20.2.8 Audio Toggle
This field defines whether or not the "Loud/Low" audio soft key is displayed on the terminal screen
during an active group call.
Selecting 'Always Loud' will direct the audio to the speaker for the call duration and the soft key will
not be visible.
Selecting 'Spkr Cntrl' will display the soft key for user control, allowing the user to direct the audio to
either the earpiece or the main speaker for the duration of call.
20.3 Timers
There are three available options in this sub menu. the timers can be set to the factory default by
selecting 'Reset' or the user can enter a time in seconds.
20.3.1 Out of Service Timer, sec
This entry defines the period of time in seconds after which the phone will alert the user that it is out
of service. The alert is repeated at this time interval until it regains service.
The range of this time period is 0 - 900 seconds, the default setting is 120 seconds.
The timer is disabled when set to zero.
20.3.2 Long Key Inactivity Timer
This timer defines the time duration of no user input/activity, i.e. a button press, after which the
terminal will return to its default mode.
The range setting for this timer is from 0 - 60 seconds and is disabled when the field entry is set to 0
(zero). The default setting is 30 seconds,
September 2008
Chapter 3 - MTM800 Product Information Manual
3-81
6866537D87-F